AUTOPRINT SCP 33
Features
Poducts FAQ
What is the feeding type of the SCP 33?
Suction feed.
What is the maximum and minimum paper size supported?
Max: 330 mm (W) x 3000 mm (L), Min: 210 mm (W) x 140 mm (L).
What is the feed tray capacity?
100 mm.
What is the creasing paper thickness range?
70 – 700 gsm.
What paper thickness is supported for perforating?
70 – 350 gsm.
What is the maximum speed of the SCP 33?
Up to 5000 sheets/hour (A4 size with 1 creasing).
What is the creasing accuracy of the machine?
±0.2 mm.
How many creasing lines can be set per sheet?
Maximum of 32 lines.
How many memory groups can the machine store?
32 programmable groups.
What type of control panel does it have?
7-inch color touch screen.
What type of knife bar is used in the SCP 33?
Big knife bar.
Does the SCP 33 include a counter?
Yes, with total counting and batch counting functions.
What additional detection functions are available?
No paper, table limit, feed and delivery, and paper jam detection.
What is the power requirement for the SCP 33?
220 VAC, single phase; power consumption is 500 W.
How much does the SCP 33 weigh?
50 kg.
What are the physical dimensions of the SCP 33?
1234 mm (W) x 500 mm (D) x 500 mm (H).
What are the standard accessories supplied with the SCP 33?
1 creasing bar and 1 perforating bar.
Are there any optional accessories available?
Yes, a cabinet and a small feeder device are available.
Can it do for 40 gsm paper?
It can do in slow speed, but there is a high risk of paper jam. Hence, not recommended.
Can it do criss cross perforation in two pass?
Yes, in slow speed to avoid paper jam.
What is the life of the blade?
Blade life is more than 1 lakh sheets. It might only get damaged due to improper running — allowing double sheets or suffering repeated paper jams.
Is stabilizer required for running the machine?
Yes, stabilizer or UPS is mandatory to run the machine (to avail 6-month warranty).