Features
- Manual Overlap feed, simple and easy operation
- Pneumatic Pressure Machine for better lamination results
- LED System Control Panel
- Adjustable Paper Side guides at feed end
- Overlap mode on/off for Overlap device
- Paper length / Overlap length can be varied by just programming
- Temperature Settings Control & Current temperature displays
- Heating Process Indicator lamp
- Anti-curling device to de-curl the sheets
- Paper Separation Sensor
- Speed Adjustment Knob
- Film Holder unit equipped with Perforation and Slitting wheel
- Angle of the Paper Receiving Tray can be varied
- Safety cover
- Lesser Make Ready Time
- Less Power Consumption
Technical Specifications
| Lamination with Auto Cut | Single Side |
| Max. Laminating Width | 370 mm |
| Unwinder Diameter | 300 mm (max), Core Dia 1 and 3 |
| Operating Speed | 13 metres/minute |
| Paper Thickness | 125-350 gsm |
| Laminating Temperature | 90-110°C (manual) |
| Heater Warm Up Time | 5 minutes |
| Total Power | 1.6 Kw |
| Temperature Control | Upper/lower (optional) |
| Upper Heating Roll | Steel |
| Lower Heating Roll | Rubber Roll |
| Control Panel | Digital LED System |
| Feeding System | Manual |
| Overlap Feeding Function | Yes |
| Bussing Function | Yes (Auto Separation) |
| Slitting Function | Yes |
| Anti-Curling Function | Yes |
| Conveyor Belt | Yes |
| Power Supply | 220V 50 Hz (Single Phase) |
| Dimensions (L x W x H) | 100 x 61 x 125 cm |
